EXA Scrap/Demolition Frameless End Dump
**Tarp is optional, not included in price**
Capacity: 89 cu. yds.
Commodity: Transportation of scrap, construction debris
Dump angle: 45 degrees, all 8 tires stay on the ground
Overall Length: 42 ft.
Height: 12 ft 4 in, 105" side walls
Width: 102 in.
Weight: 22,800 lbs
Hydraulic Dump Hoist: 8", 5-stage inverted trunnion mount by Custom Hoists. Front-mounted outside of bulkhead.
Suspension: 50,000 lbs Hutch- Single Point Tandem with Oscillating Trunnion Bushing
Body: 5mm Hardox 450 Steel (175 Ksi, 450 Brinell Hardness)
Top Rail: 4" x 4" x 1/4" tube with angle
Gate: 3/16" Hardox 450 Steel (175 Ksi, 450 Brinell Hardness). Barn Door style with hinges on the curb side, air operated bottom latch and integrated mud flaps
Front: 3/16" Hardox 450 Steel (175 Ksi, 450 Brinell Hardness)
Bracing: 1/4" High strength steel internally stiffened
Axles: Two (2) 30,000 lbs. each axle with automatic slack adjusters and Stemco wheel ends.
Brakes: 16.5" x 7" brakes with 2S1M ABS
Landing Gear: One (1) pair of Holland 2-speed landing gear
Upper Coupler: Oscillating fifth wheel plate with Holland King Pin
Draft Arms: 5”x3”x1/4” Rectangular Tube
Tires: Eight (8) 11R x 24.5 16 Ply
Wheels: Eight (8) 8.25 x 24.5 Steel 10 Hole Hub Piloted
Access Ladder: Steel front and rear ladders
Coating: Two coats of polyurethane high-gloss on an epoxy primer (4-6 mils DFT)
Paint Prep: All steel surfaces shotblasted and pre chem wash
Conspicuity tape: 3M Per DOT
Fenders: Rear steel bolt-on
Full Dump Position: Without lifting the front wheels
Lights: Sealed harness and recessed Optronics GloLights LED per DOT and ICC
Mud Flaps Two (2) Anti-sail attached to rear gate
Paint Color: Available in a variety of different colors. Standard paint colors: White, Black, Gray
Option- Wheels: Aluminum
Option- Length: Custom capacity (ex. 40ft long; 100" sides, 87 cu yds)
Option-Side walls Height 84"-105" side walls (65-99 cu yds)
Option- Frame: Quarter frame
Option Tarp: Cramaro electric or manual options
Option- Fenders: Aluminum or steel front fenders
This monthly repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (Australian Credit License: 389328) This estimate is based on a Chattel Mortgage, which is only available where the purchaser of the item intends to use the item for primarily commercial use. The term of this loan is based 60 months with 30% residual & subject to qualifying commercial assets and credit criteria. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive away price, any repayment estimate does not include additional costs, such as stamp duty and other government charges. The term of this loan is 60 months. This estimate should be used for information purposes only and is not an offer of finance on particular terms. This repayment estimate is the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd’s panel of lenders and products for this specific item each day, and includes several assumptions about the item, purchaser, and loan specifics. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd loan approval process. A specific quote including details of all fees and charges, or loans for items with primarily or wholly personal use can be obtained via overdrivefunding.com.au or by calling 1800 954 124.
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
